- No BS III vehicles will be sold in India from 1 April, 2017
- The Honourable Supreme Court banning the sales and registration of BS III vehicles, So India is all set to move to a BS IV future and it seems that the auto manufacturers will have to pay the price, as there are over 8.2 lakh BS III vehicles still lying unsold in the country.
- This scramble is happening despite the fact that the date for switching over from BS III vehicles to BS IV vehicles was always known, the original guidelines said that no BS3 vehicles could be ‘manufactured’ in India after 1 April, 2017.
- And now with the Supreme Court banning the sales and registration too, many manufacturers, specially the two-wheeler manufacturers are left with an unsold stockpile of BS III vehicles. Therefore, many of them are offering heavy discounts on their BS III models, even on the performance bikes.
- So, how difficult is it to turn a BS III vehicle to BS IV? Is retro fitment possible? And is it value for money? What are options for auto manufacturers? We answer all these and more, including the difference in hardware between BS3 and BS4 here.
- Two Wheelers
- Petrol Powered Passenger Vehicles and SUVs
- Diesel Powered Passenger Vehicles and SUVs
- Large Commercial Vehicles
Possibly the most affected of the lot in terms of sheer number of unsold units, the two-wheeler segment in India is the one offering the biggest discounts. Some manufacturers have offered up to a stunning 50 percent discount on their bikes and scooters which saw a huge rush in potential customers trying to get what could possibly be a deal of a lifetime!
Coming to tail pipe emissions, BS4 motorcycles in most cases require larger catalytic converters in terms of flow volumes to eliminate harmful nitrogen based gasses. And although that could be adapted within the exhaust system, most bikes also need a secondary airflow system that adds oxygen (or natural air) to the exhaust stream just before the catalytic convertors. This of course, is a more complex system for which retro fitment is more difficult. Many manufacturers have also resorted to a more complex ECU and ignition control setup that has more than the standard idle map and full throttle map for a better control of the ignition timing which in turn makes for a cleaner burn and thus, less pollution. The byproduct of this is also a more linear acceleration curve and better fuel economy.
Petrol Powered Passenger Vehicles and SUVs
Most petrol powered passenger cars in India have already converted to BS4 years ago. This is mainly because the change from BS3 to BS4 is easiest for internal combustion petrol engines. Most emissions standards are met by the engines themselves without the need for complex post combustion methods to reduce the effect of pollution. The addition of turbocharged smaller capacity engines for example is not for more power or more fun but because it is very easy to attain BS4 emissions levels with these modern engines.
Even naturally aspirated internal combustion engines that are slightly older in terms of technology can meet BS4 with a larger catalytic convertor or two catalytic convertors either in pre-engineered form or retrofitted. Ideally, the catalytic convertors in series is the solution to go for, with one mounted right after combustion occurs (normally on the exhaust manifold itself) and one mounted as a part of the pre muffler package or just before the pre muffler package. The secondary catalytic convertor can also be mounted before or as an in built part of the end can. Similar volume catalytic convertors with a higher concentration of Platinum Group Metals (PGM) can also result in lower emissions if packaging is an issue.
It is easiest to retrofit petrol powered passenger cars as most of them already have an on board diagnostics or OBD 2 port, which controls engine behavior in real time. The OBD 2 port and real time emissions control is mandatory for BS4.
Diesel Powered Passenger Vehicles and SUVs
Diesel powered passenger vehicles and SUVs are the small portion of the passenger car segment that will get slightly affected by the BS3 to BS4 move as there were still a few manufacturers like Mahindra and Tata Motors manufacturing BS3 vehicles for rural and semi urban markets. These vehicles will now be rendered defunct and in most cases, these were mere variants of BS4 enabled cars that are already available in the market (for example: Mahindra Thar).
The implementation of BS3 had anyways made most manufacturers switch to electrical fuel management and common rail technology for the diesel engines as meeting BS3 with older direct injection technology was quote tough anyways. That said, just like the petrol powered cars, the biggest change in terms of emissions control hardware is a larger volume catalytic convertor or Diesel Oxidation Catalyst (DOC) as it is known specifically for diesel engines. The new BS4 cars will also have to have atleast one NOX sensor in the tail pipe to constantly monitor and a particulate filter to capture particulate matter.
Just as we mentioned earlier, on board diagnostics or OBD 2 ports in passenger diesel powered vehicles will be mandatory to ensure real time engine performance adjustments based on pollutant levels. These are very difficult to incorporate into older technology.
Large Commercial Vehicles
While passenger cars and two wheelers can still take some form of retro fitment, it is the commercial vehicle segment that will go through one of the most revolutionary changes in technology and mechanical advancements in recent history with the new BS4 norms. Retro fitment of emissions control units to meet BS4 is almost impossible or very difficult as most systems used are still mechanical and not electronically controlled. The use of on board diagnostics or OBD has been made compulsory not only for passenger cars but also for commercial vehicles which means that all commercial vehicle manufacturers will have to adopt newer ECU based technologies.
In terms of actual hardware post the engine that helps reduce the effect of pollutants, BS3 vehicles today in India do not have any sort of catalyst based system to reduce pollution and have only a noise control muffler that helps reduce audible emissions. The newer trucks and busses, etc will have a mandatory catalytic convertor or Diesel Oxidation Catalyst (DOC) as in the passenger vehicle segment. The DOC will take care of NOX emissions while particulate matter (which includes visible black soot) will be contained with the help of the particulate filers.
Certain higher end trucks and busses will also use another type of post engine exhaust which is more advanced. These include a collection of Diesel Oxidation Catalyst (DOC), Lean Nox Catalyst (LNC) and Lean Nox Trap (LNT) and also a Urea injector called the Selective Catalytic Reduction (SCR) module. That said, this technology although used very commonly in Europe is still at a very fledgling stage in India as it needs an occasional top-up of Urea along with regular fuel top ups in order to reduce polluting gasses.
To sum up, petrol powered passenger cars will be fastest to adapt followed by two wheelers and diesel passenger cars. Commercial vehicles will have to go though a more engineered approach to meet the BS4 regulations. That said, most vehicles will not just be ‘retrofitted’ with these technologies that we explained earlier to meet BS4 and a more holistic approach to the problem of old unsold stocks will have to be explored.